Researching your bathroom remodeling costs in Broward County? The key factors are size, finish level, scope, and services needed.
How much should you budget for your bathroom remodel? Here’s how to make a rough prediction of bathroom remodeling costs in Broward County. The main variables are:
- Size of your bathroom, typically determined by the number of bathroom fixtures and the room’s square footage.
- Finish level — from budget to luxury, of all the materials, fixtures and finishes for your renovation.
- Scope — Are you just replacing fixtures and finishes? Are you changing the floor plan, including moving walls and utilities? Are you adding a new bathroom, or moving your bathroom to a different part of the house?
- Services — Do you just need construction work? Do you need professional design or architecture services?
We’ll discuss these variables below, but for now let’s start with an example.
For a full renovation (without layout changes) of a standard full bathroom, with basic general contracting services, here’s what you can expect starting costs for your project to look like in Broward County:
- Budget full bathroom renovation costs: Starting at $16,500
- Mid-grade full bathroom renovation costs: Starting at $26,500
- High-end full bathroom renovation costs: Starting at $38,500
We want you to be completely prepared for the cost of your home remodeling project, so our pricing estimates are inclusive of all materials, labor, overhead, and a standard general contractor’s margin.
When you’re ready to get started on your bathroom or home remodel, work with Sweeten to renovate with the best contractors in Broward County.
Size: How dimensions affect your bathroom remodeling costs in Broward County
This may sound obvious, but the larger your bathroom, generally the more expensive your renovation project will be. However, it’s not a totally straightforward calculation, because what matters most isn’t the footprint, it’s the fixtures and finishes that will fill that space — more plumbing fixtures, in the form of sinks, showers, toilets, etc., means greater costs. Here’s how you can think about sizing up your bathroom remodeling project:
- Half bathrooms, or powder rooms, usually have just a sink and a toilet. The typical fixture count for a half bath is 1-2.
- Full bathrooms usually have a sink, toilet, and bathtub or shower. The typical fixture count for a full bath is 3-4.
- Primary bathrooms, also called master bathrooms, usually have a generous vanity area with two sinks, plus a toilet and bathtub or shower. The typical fixture count for a primary bath is 4-5.
- Deluxe primary bathrooms usually have two sinks and an extended vanity, an extra-large shower or a shower and separate bathtub, and a toilet, which may be enclosed separately. The typical fixture count for a deluxe primary bathroom is 5+.
For any size bathroom, a wide range of bathroom fixtures is available, from budget to ultra-luxury. Your style preference, budget, and the space’s size will determine the suite of fixtures needed, including a sink, vanity, faucet, toilet, shower head, bathtub, and accessories. The low end of fixtures for a small bathroom is $1,500, and fixtures can run upwards of $15,000.
Finish level: How bathroom design affects remodeling costs in Broward County
Finish level refers to the general quality and price level of fixtures, materials, and finishes. These include wall treatments, vanity materials and fabrication, flooring choices, and the brands and models of sinks, faucets, and fixtures you choose. The higher the finish level, the faster your costs will increase.
- Budget finish: Budget materials are generally off-the-shelf items from “big box” stores or IKEA. This includes stock vanities; various tiles under $5/square foot such as Pergo and Daltile; and fixtures by Delta, Moen, and Pfister.
- Mid-grade finish: Mid-grade materials balance cost efficiency with material quality. This includes vanities by Design House, Fresca, and Signature Hardware; tile by TileBar; and fixtures by American Standard, Hansgrohe, and Kohler.
- High-end finish: High-end materials take quality and craftsmanship above standard, and this category introduces custom work. This includes tiles by Clé Tile, Ann Sacks, and Artistic Tile; vanities by Duravit, Robern, and DXV; and fixtures by Kallista and Brizo.
- Luxury finish: Luxury means the sky’s the limit, where customization, craftsmanship and materials truly go above and beyond. Think brands like Lefroy Brooks, THG Paris, and Samuel Heath.
Scope: Rip-and-replace vs. gut bathroom renovation in Broward County
Project scope refers to the amount and type of work that needs to be done, and can have implications on which professionals you’ll need to hire. We divide scope into the following broad categories (when a contractor prepares an estimate for your renovation, it will be much more detailed, and will include costs of the exact fixtures and finishes):
Full renovation (also called “rip-and-replace”)
A full renovation means that you’re replacing all old fixtures and finishes with new ones, while leaving everything in place. So, effectively, the layout is the same before and after the renovation (hence, the nickname “rip-and-replace”). This is the more straightforward way to reimagine your space, and can often be done with just a licensed general contractor partner.
Gut renovation
For a gut renovation, you’ll be dropping walls, rerouting plumbing lines and rewiring electrical — generally stripping the room to the studs and subfloor (or, even removing these!) in order to change up the layout of the space. This kind of transformational project will require professional design and architectural services, permitting, and licensed general contractors, which ensures the work is done safely and to code.
Services: Bathroom remodeling services, and how they affect costs in Broward County
The two main services to consider for your bathroom renovation are build service and design service. Depending on your needs, you have some options for what types of firms to hire.
Build service with a general contractor
Build service would include demolition and construction services, and would be carried out by your general contractor. Some general contractors are considered build-only firms, which means that they do not offer full professional design. Even within the build-only category, there are a range of different service offerings a contractor might provide — some will strictly work with finished plans from a professional designer, some will work with you to carry out the vision you conceive, and others are more willing to offer creative suggestions and advice on material and fixture choices, or even rough visualizations for spatial layout.
A combination of service level, experience, and things like firm size and overhead might all contribute to how competitive a contractor’s pricing is. We generally recommend to connect with a few different contractors to feel out what level of service best suits you.
Design service with an architect or interior designer
Design service can be broken down into creative design and technical design. For creative design service, which is almost always optional, you’ll work with an architect or interior designer to reimagine the space. This added layer of service will generally cost between 10-20% of your construction budget, depending on the level of service included in your design package (though, not all firms determine their fees based on cost of construction — some may charge a flat fee based on project scope and anticipated duration, for example). So, for a $40,000 bathroom renovation, you might expect to pay your architect or designer $4,000 to $8,000.
Technical design expertise is needed in the form of an architect (or sometimes structural engineer) for projects like gut renovations where permitting is required. Their main role is to ensure that the project is done safely and to code.
What is a full-service, design-build firm?
If you need both design and build services, you can choose to hire a professional designer or architect, and separately, a general contractor. But there’s another option that comes with some distinct benefits: you can hire a design-build firm — a general contractor with dedicated professional design under one roof. This means you work with the same firm from planning and design through construction. In addition to the continuity, which can often save time in the process, some clients appreciate that the working relationship means more seamless coordination, which can even help to keep your project on budget.
Blue Construction & Plumbing brings homeowners an exceptional renovation experience by personally designing and crafting your project, while offering expert guidance and support.